Connecting ropes
1 When combining ropes, use appropriate nodes, which, for example, working under the stress, will not solve themselves. One of these nodes is Szotowy. It begins to bind it by making both pins at the ends of both ropes.
2 Then one loop is slid into the eye of the other. This binding method allows you to combine ropes made of various materials, of different thickness.
3 The loose end of the outer loop is overwhelmed over it and cut through the eye of the inner loop. You must not release the rope, from which it began.
4 Finally, the knot is tightened by pulling both ropes in opposite directions, Keep the ends of the inner loop together. Leave the ends of both loops, This prevents you from solving.
Cross -binding
1 Cross binding is used to combine various structural elements. The combined items should be tied closely with a string. U V should first tie the string to one of the branches.
2 The first pole should be wrapped in a string, Then start to bind both.
3 A tight string should be strictly wrapped in two poles. The next turns of the string should not overlap. We wrap the poles so many times, That the string would surround them on the section around 3 cm.
4 After binding poles, Slip the string through the break between them and wrap it several times around the knot.
5 We end the binding of poles by swinging a string several times through a loop made around one of the branches. Finally, pull the string tightly by clenching the knot.
6 The poles connected in this way can be crossed at any angle; They can be useful for various types of structures, such as a hut.
